Offering a wide temperature range and suitable for the pumping of corrosive media. Grundfos’ reliable, compact pumps are ideal for washing and cleaning applications. High efficiency, smart motors perfectly control the process with low energy consumption.
BMS
The BMS range is a completely new range of booster modules mainly used for reverse osmosis and (ultra-) filtration applications that improve efficiency compared to earlier ranges.
Literature
- General Brochure
- Product Flyer
CM / CME
This horizontal multistage close-coupled pump is a compact, reliable and quiet pump designed to work in a variety of applications.
Literature
- General Brochure
- Product Guide / Product Flyer
- Installation & Operation Guide
- Spec Sheet / CRE, CRIE, CRNE, SPKE, CRKE, MTRE, CME Installation & Operation Guide
Control MPC
Grundfos Control MPC is a control cabinet with a CU 351 controller that permits monitoring and control of up to six identical pumps connected in parallel. It comes with everything needed to get started, and contains software optimised for your particular application.
CR / CRE
The basic CR pump range is available in four different materials: cast iron, two grades of stainless steel, and all-titanium. The CRE pump is a CR pump, motor and integrated variable frequency drive.
Literature
- CR Brochure / CRE Brochure / CRE-DP Flyer / CR Custom Built Flyer / CRE Plus Flyer
- CR Product Guide / CRE Product Guide / CR Custom Built Product Guide
- CR Installation & Operation Gudie / CRE-DP Installation & Operation Guide / CRE-DP Permanet Magnet Motor Installation & Operation
- CRE-H Pressure Transducer Installation & Operation Guide / CRE Installation & Operation Guide / CRE PM Installation & Operation Guide / CR, CRE Installation & Operation Guide / CRE, CRIE, CRNE, SPKE, CRKE, MTRE, CMS Installation & Operation Guide / CRE-DP Installation & Operation Guide
CRE Plus
The CRE-Plus is a simplex pump system and one of a wide range of E-pumps offered by Grundfos. It utilizes "smart" pump technology to vary motor output according to demand so energy is not wasted on generating pump speed that is not required.
Literature
- CRE Brochure
- CRE Product Guide
CR-H / CRN-H / CRE-H / CRNE-H
All the benefits of the renowned Grundfos CR for an ANSI dimensional solution that will fit into your existing pump and piping footprint with no modifications (ANSI / ASME B73.1 piping dimensions).
Literature
- General Brochure
- Product Guide / Product Flyer
- Installation & Operation Guide
CRN
CR, CRN handles a variety of liquids from potable water to industrial liquids within a very wide temperature, flow and pressure scale.
Literature
- CRN High Pressure Product Guide / CRN MAGDrive Product Guide / CRN Product Flyer
- CRN MAGDrive Installation & Operation Guide / CR, CRN Installation & Operation Guide
DME
Grundfos DME Digital Dosing pumps combine perfect precision with user-friendliness, covering large dosing quantities in the range from 60 l/h to 940 l/h.
Literature
- General Brochure
- Product Guide / Product Flyer
- Model AR Installation & Operation Guide
- Model B Installation & Operation Guide
DMH
The Grundfos DMH range is a series of extremely strong, robust pumps for applications requiring a reliable dosing and high-pressure capability.
Literature
- General Brochure
- Product Guide
- Product Flyer
DMX
This series is designed to be highly versatile, which is reflected in the wide flow range covered and the choice of dosing head sizes, materials, and accessories available.
Literature
- General Brochure
- Product Guide
- Product Flyer
- Installation & Operation Guide
Dosing Skid System (DSS)
Dosing Skid Systems (DSS) are complete solutions designed to feed liquid chemicals from a supply source – usually tank or drum – to an injection point.
Literature
- General Brochure
- Product Flyer
- Installation & Operation Guide
Dosing Tank Station (DTS)
Dosing Tank Stations (DTS) are the first choice in the matter of economic efficiency when adding liquids as coagulants, disinfectants or neutralizing agents in a precise and controlled way to a process.
Literature
- General Brochure
- Product Guide
- Installation & Operation Guide
LCSE
The Grundfos line of LCSE, single stage, end suction, split coupled pumps with integrated motor, drive, and control serves as the industry standard in performance, quality, and durability.
Literature
- Product Flyer / LCSE Spec Sheet / E-Pumps Brochure
- LCS, LCSE Parts Guide / LCSE, VLSE Installation & Operation Guide
- LFE, LCSE Installation & Operation Guide / LFE, LCSE Range Chart
- LCSE Range Chart / LCSE Cross Section
MTA
Grundfos’ MTA range of single-stage immersible pumps has been designed especially for filtering systems in the machine tool industry.
Literature
- General Brochure / General Flyer
- Product Guide
- Installation & Operation Guide
- Conversion Guide
MTR / SPK / CRK / MTC
MTR, SPK, CRK, and MTC pumps are vertical multistage centrifugal pumps designed for pumping of cooling lubricants for machine tools, condensate transfer and similar applications.
Literature
- Immersibles Brochure / MTR Brochure
- MTR, MTC, MTA Product Flyer / MTR, MTC Product Guide
- SPK, CRK Product Guide / MTR 8 Product Guide
- MTR, SPK, CRK Installation & Operation Guide / MTC Installation & Operation Guide
PACO KP / KPV / KPVS
The PACO KP/KPV/KPVS split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipe work.
Literature
- KPVS Brochure / KPV Flyer / KPV Spec Sheet / KP Flyer / KP Spec Sheet / PACO KPVS / KPVS Spec Sheet
- Product Guide / KP-KPV Parts Guide / KPVS Parts Guide / KP, KPV, KPVS Installation & Operations Guide / KP Cross Section / KPV Cross Section / KPVS Cross Section / KP Range Chart / KPV Range Chart
PACO LC / LF / LCS
Advanced features incorporated as standard on PACO end suction pumps ensure optimum performance and reliability.
Literature
- LCS Brochure / LCS Flyer / LCS Spec Sheet / LCS Range Chart / LC Spec Sheet / LC Cross Section
- LF Flyer / LF Spec Sheet / LF Cross Section
- LC, LF, LCV Parts Guide / LCS, LCSE Parts Guide / LC, LCV, LF, LCS Installation & Operation Guide
- LCV Cross Section / LFE Spec Sheet / LFE Parts Guide / LFE, LCSE Range Chart / LFE Range Chart
PACO VL / VLS
The VL/VLS Inline pumps have proven to be extremely versatile, often exceeding the requirements for a variety of market applications, such as chilled water, condenser water, and hot water systems.
Literature
- Product Flyer / VLS Spec Sheet / VL Spec Sheet / VL, VLC, VLS, VLSC Parts Guide / VL Cross Section / VLS Cross Section
PACO VSM / VSMS
PACO VSM / VSMS are vertically mounted top suction/top discharge pumps fit where many pumps won’t.
Literature
- General Brochure / VSMS Brochure
- General Flyer / VSMS Product Flyer / VSM, VSMS Parts Guide / VSM, VSMS Installation & Operation Guide / VSM, VSMS Cross Section
Peerless 8175
The Peerless Pump 8175 Series process pump is manufactured for a wide range of flow and head requirements. The 8175 Series pumps is engineered to lower your operating costs over time.
Literature
- General Flyer
Peerless 8196
The Peerless 8196 Performer Series combines high efficiency, maximum performance, and extended Mean Time Between Failure (MTBF) for reduced maintenance cost.
Literature
- General Flyer
Peerless 8796
The Peerless Pump 8796 Series pumps are manufactured for a wide range of flow and head requirements and meet the latest ASME specifications.
Literature
- General Flyer
- Product Flyer
Peerless AE
The AE Series pump uses a class 35 cast iron casing material. To provide permanent alignment of bearings and all rotating parts, Peerless Pump casts the bearing bracket supports as a part of the lower casing half.
Literature
- General Brochure
- Product Guide
Peerless F / C
Peerless F Pumps are general purpose, frame mounted, end suction pumps flexibly coupled to drivers and equipped with coupling guards.
Literature
- F Series Brochure
- C Series Brochure
- F/C Product Flyer
Peerless TU / TUT
The Peerless TU/TUT are multi-stage, single suction, horizontal pumps. The TU/TUT range allows for higher working pressures and results in higher heads.
Literature
- General Brochure
- Product Flyer
SMART Digital S - DDA/DDC/DDE & Digital XL - DDA/DDE
Intelligent dosing pumps with new drive and adjustment mechanisms represent the ideal solution for increasingly complex dosing.
Literature
- Digital S Product Flyer / Digital S Databook
- Digital XL Product Flyer
- DDA Quick Guide
- DDE Quick Guide
TP / TPE
Grundfos TP and TPE vertical in-line pumps are used in a variety of applications. The pumps are all single-stage, in-line centrifugal pumps with standard motors and mechanical shaft seals.
Literature
- TP Product Guide / TPE Product Guide
- TP VersaFlo Installation & Operation Manual
